Timber Frame Butterfly Table

Simple Turnover Device for the turning over of panels to enable the fitting of insulation, or the nailing on both faces of a panel

Specification

A pair of hydraulically operated tables (also known as a butterfly table) that enable the panels to be brought to the vertical position, passed to the 2nd table, and safely lowered back down on the opposite side for fitting of insulation and closing of the panel. There is an option to have pneumatically operated pop up idle roller tracks fitted in the table, for easy loading and unloading the panels. The hydraulic lifting of the tables is controlled by push button operation, with fail safe locking cylinders 3,5kw motor 6m standard length (optional 12m) 4m maximum panel heigh. A range of options to allow the tables to also be used as assembly bench for walls and floors and to integrate into a line

Both Tables - up to 6m (1.0m tonne capacity)
Both Tables - up to 9m (2.0m tonne capacity)
Both Tables - up to 12m panel length (3.0m tonne capacity)

Optional Equipment

Rollers for rolling elements in and out of the tables. Price per 6m table
Pneumatic locking of infeed rollers (price per 6m)
Pneumatic side clamping bars & pins – price per row (5 sets recommended for a 6m table, 8 for a 9m table, 11 for a 12m table.
Reduction for 1st table only (Panel rotated by overhead crane and lowered back down onto the same table (per 6m)
A Frame 6m x 2m for working on panels in vertical position - complete with rollers
Handwheel adjustment of width via rack and pinion guide to extend the table up to 3.8m - per table
Electrical adjustment of width via rack and pinion with a 1250mm stroke – also can be used for squaring the panel (6m), with a stepless motor
Additional cost for electrical squaring per 3m extra
Manual sideways movement of 2nd table (plus price per meter below)
Price per meter of sideways movement
Extra for motorisation of sideways movement
Floor cassette assembly kit - including 4 lateral slots with holes at 300, 400, 600mm, together with alignment bars, and a second sent of clamping bars -adjustable for different thicknesses of stud - price per 6m table, completely retractable when not in use.
Floor cassette option 9m table
Floor cassette option 12m table
Pop rollers for taking panel off sideways - price per row (3 rows necessary for a 6m table, 5 rows for a 9m table, and 6 rows for a 12m table)